About us things

what is chiller,and what do we know about TF-Chiller(腾飞制冷).

what is chiller,and what do we know about TF-Chiller(腾飞制冷).

  • Saturday, 02 May 2020
  • 5
  • 4475
  • 0

Industrial chiller is a kind of chiller, chiller can be divided into air-cooled chiller and water-cooled chiller.

Chiller is a kind of water cooling equipment, is able to provide constant temperature, constant current, constant pressure cooling equipment. Cold water machine the principle is to a certain amount of water injection machine of the internal water tank, through the mechanism of cold water cooling system will be water cooling, and then have the machine within the cryogenic frozen water injection pump need to cooling equipment, cold water machine the internal heat away, the high temperature cooling of the hot water back into the water again, so exchange cooling cycle, as the function of the cooling equipment.

TF-Chiller(腾飞制冷 TF-Chiller) professional chiller manufacturer,export to all parts of the world. In the Middle East, southeast Asia has a large number of trusted customers.

Every small improvement comes from hard working on plenty of details, this is a note every TengFei worker is firm in. From designing and manufacturing of products to pre-sales and after-sales service, we are always looking for even a minor change for the better. 

Use in industry

In industrial application, chilled water or other liquid from the chiller is pumped through process or laboratory equipment. Industrial chillers are used for controlled cooling of products, mechanisms and factory machinery in a wide range of industries. They are often used in the plastic industries, injection and blow molding, metal working cutting oils, welding equipment, die-casting and machine tooling, chemical processing, pharmaceutical formulation, food and beverage processing, paper and cement processing, vacuum systems, X-ray diffraction, power supplies and power generation stations, analytical equipment, semiconductors, compressed air and gas cooling. They are also used to cool high-heat specialized items such as MRI machines and lasers, and in hospitals, hotels and campuses.

Chillers for industrial applications can be centralized, where a single chiller serves multiple cooling needs, or decentralized where each application or machine has its own chiller. Each approach has its advantages. It is also possible to have a combination of both centralized and decentralized chillers, especially if the cooling requirements are the same for some applications or points of use, but not all.

Decentralized chillers are usually small in size and cooling capacity, usually from 0.2 to 10 short tons (0.179 to 8.929 long tons; 0.181 to 9.072 t). Centralized chillers generally have capacities ranging from ten tons to hundreds or thousands of tons.

Chilled water is used to cool and dehumidify air in mid- to large-size commercial, industrial, and institutional (CII) facilities. Water chillers can be water-cooled, air-cooled, or evaporatively cooled. Water-cooled chillers incorporate the use of cooling towers which improve the chillers' thermodynamic effectiveness as compared to air-cooled chillers. This is due to heat rejection at or near the air's wet-bulb temperature rather than the higher, sometimes much higher, dry-bulb temperature. Evaporatively cooled chillers offer higher efficiencies than air-cooled chillers but lower than water-cooled chillers.

Water-cooled chillers are typically intended for indoor installation and operation, and are cooled by a separate condenser water loop and connected to outdoor cooling towers to expel heat to the atmosphere.

Air-cooled and evaporative cooled chillers are intended for outdoor installation and operation. Air-cooled machines are directly cooled by ambient air being mechanically circulated directly through the machine's condenser coil to expel heat to the atmosphere. Evaporative cooled machines are similar, except they implement a mist of water over the condenser coil to aid in condenser cooling, making the machine more efficient than a traditional air-cooled machine. No remote cooling tower is typically required with either of these types of packaged air-cooled or evaporatively cooled chillers.

Where available, cold water readily available in nearby water bodies might be used directly for cooling, replace or supplement cooling towers. The deep water source cooling system in Toronto, OntarioCanada, is an example. It uses cold lake water to cool the chillers, which in turn are used to cool city buildings via a district cooling system. The return water is used to warm the city's drinking water supply, which is desirable in this cold climate. Whenever a chiller's heat rejection can be used for a productive purpose, in addition to the cooling function, very high thermal effectiveness is possible.

5 users like this.

Leave a Reply